What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 01:23

2024–10–14 [Omar Gharbi Omar Gharbi ]
Edit 2024–10.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
nine
This is where this question deviates from being a 'generic' question, and becomes more specific.
It seems Mohan does not understand the difference between a comment and an Answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
so, what happens?
How do flat Earthers explain the existence of other spherical planets?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What is the most heartbreaking thing your child has told you?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why do people think Mirko is boring in My Hero Academia?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
First Sentence:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where the MOV conducts again, and dissipated the energy.
How do you feel about Donald Trump signing an executive order that says there are only two genders?
At one ohm, the resistor has a maximum of 1 watt power.
He then describes Rainy Season and Lightning.
What does a fuse do?
The bolt then partially travels down the line to your home.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At least they know the answer if they wanted it.
Are female judges more lenient than male ones?
The MOV will conduct when the voltage exceeds 50% of line voltage.
a photo is worth a thousand words.
Barnstars:
From 1 to 10, how dark is the Naruto fandom? Why?
what exactly is a ‘surge’ protector?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
Why are black women the largest unmarried group in the United States of America?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
the problem then depends on "how fast does the fuse operate?".
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is 'the assistant's answer'
eight
Here is a simplified AC power diagram.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
I post the exact comment here.
There are two important concepts here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
One
He then asserts :
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes the function of a fuse.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are three different concepts here that are getting confused.
These devices are installed between the “hot” and “neutral” and protective ground.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but I think this circuit , shows a few more pieces.
So, the voltage could go up to 500 volts, and the fuse will not open up.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The other is “what does a “fuse” do?”
but this device (an Inductor) … impedes the rapid changes in the current.
Now when you have a certain ac resistance, then a current flows in a loop.
In schematic diagrams this is the symbol for a fuse:
For this case there are devices called Metal oxide varistors (MOV).
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But it can get overloaded, and no longer works.
Upvotes:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The third is lightning and “how it gets conducted into a home.”
2024–10–10[John johnson John Johnson ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[image of Common-mode choke]
What is lightning?
These are simplified answers to the original question, and does not change anything I wrote above.
It also is a device that limits the change in current flow.
A fuse is a non-resetable over current circuit protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
This device then solves the entire problem.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.